[amsat-bb] 4800/9600 baud telemetry/packet

[Cathryn Mataga]

Trying to figure out the hardware side.  Maybe wiring the ports on that 
13 pin connector on the TS2000 directly to a USB sound card, PTT to a 
USB serial card port, and then using a USB ground isolation dongle to 
separate grounds?  Seems like that would work. Worst for me is soldering 
those connectors.

On 10/16/2019 4:26 PM, Scott via AMSAT-BB wrote:
> Hello!
>
> I've referred many people to these pages which outline the various software
> tools depending on whether you prefer Windows or linux:
>
> https://www.pe0sat.vgnet.nl/decoding/block-diagram/
>
> https://www.pe0sat.vgnet.nl/decoding/unix-tlm-decoding/
>
> -Scott,  K4KDR
>
> =====================
>
> On Wed, Oct 16, 2019 at 7:20 PM Cathryn Mataga via AMSAT-BB <
> amsat-bb at amsat.org> wrote:
>
>> How are people decoding telemetry and packet these days?
>>
>> Found some software that looks like it'd work, but curious, what
>> software, cable/interface the 'cool people' are using.  I have TS-2000
>> and Windows.
>>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb