[amsat-bb] IC-9700 & foxtelem 1.08p

Chris Thompson g0kla at arrl.net
Wed Oct 30 20:59:33 UTC 2019


I have tried to reproduce this, but I do not have a 9700 so it is hard.  So
far I can not work out what is wrong.

Can someone describe the setup with the 9700?  How is the audio read into
the computer and sent to FoxTelem?  Is FoxTelem reading it from a sound
card?  Or what looks like a sound card?

Can someone use Audacity and record some audio for me to test with?  Try to
record it at the sample rate you use in FoxTelem.  e.g. if you set FoxTelem
to IQ and 48000 samples per second, then set Audacity to 48000 too.

thanks
Chris

On Wed, Oct 30, 2019 at 1:23 PM jeff griffin via AMSAT-BB <
amsat-bb at amsat.org> wrote:

>   I'm going to wait for the fix for the 9700. In the meantime I'm now
> collecting telemetry with my FIAB with a eggbeater antenna setup that I'm
> going to leave up here for the winter. I'm seeing a much better decode rate
> with 1.08p over 1.07y, about 2 to 1. So I'm seeing 1.08 is clearly better
> then 1.07. Thanks Chris!
>
> 73 Jeff kb2m
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Kevin via
> AMSAT-BB
> Sent: Wednesday, October 30, 2019 12:54 PM
> To: amsat-bb at amsat.org
> Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
>
> Hi Alan and everyone else that replied,
>
>    Windows Sinc also has zero decodes, tried all decoder modes.
>
> for now 1.07y  FTW
>
> Thanks
> Kevin
>
>
> On 10/29/2019 23:20, Alan wrote:
> >
> > I you are using the Raised Cosine decoder, try the Windows Sinc instead.
> >
> > 73,
> >
> > Alan
> >
> > WA4SCA
> >
> > *From: *Kevin via AMSAT-BB <mailto:amsat-bb at amsat.org>
> > *Sent: *Wednesday, October 30, 2019 12:21 AM
> > *To: *amsat-bb at amsat.org <mailto:amsat-bb at amsat.org>
> > *Subject: *[amsat-bb] IC-9700 & foxtelem 1.08p
> >
> > Hi All,
> >
> >   Any IC-9700 users out there that have switched to foxtelem 1.08p
> >
> > using USB and IQ mode? I see a good eye but get zero decodes, dropping
> >
> > back to 1.07y and it all starts working again.
> >
> > 73
> >
> > Kevin WA7FWF
> >
> > _______________________________________________
> >
> > Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> >
> > to all interested persons worldwide without requiring membership.
> > Opinions expressed
> >
> > are solely those of the author, and do not reflect the official views
> > of AMSAT-NA.
> >
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> >
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>


-- 
Chris E. Thompson
chrisethompson at gmail.com
g0kla at arrl.net


More information about the AMSAT-BB mailing list