[amsat-bb] IC-9700 & foxtelem 1.08p

[Kevin]

Chris,
   The 9700 outputs a 12khz IF signal that is passed to the internal 
codec and then out the USB port and windows treats it as a soundcard.
   I used audacity to create about a 2min file and then read it in on 
1.07y to verify it is good.
   I uploaded it to dropbox and the link is
  https://www.dropbox.com/s/eh5bya72y8gfskt/fox1.wav?dl=0

it was recorded at 48000 and has been saved as a wav

Thanks
Kevin wa7fwf

On 10/30/2019 13:59, Chris Thompson via AMSAT-BB wrote:
> I have tried to reproduce this, but I do not have a 9700 so it is hard.  So
> far I can not work out what is wrong.
>
> Can someone describe the setup with the 9700?  How is the audio read into
> the computer and sent to FoxTelem?  Is FoxTelem reading it from a sound
> card?  Or what looks like a sound card?
>
> Can someone use Audacity and record some audio for me to test with?  Try to
> record it at the sample rate you use in FoxTelem.  e.g. if you set FoxTelem
> to IQ and 48000 samples per second, then set Audacity to 48000 too.
>
> thanks
> Chris
>
> On Wed, Oct 30, 2019 at 1:23 PM jeff griffin via AMSAT-BB <
> amsat-bb at amsat.org> wrote:
>
>>    I'm going to wait for the fix for the 9700. In the meantime I'm now
>> collecting telemetry with my FIAB with a eggbeater antenna setup that I'm
>> going to leave up here for the winter. I'm seeing a much better decode rate
>> with 1.08p over 1.07y, about 2 to 1. So I'm seeing 1.08 is clearly better
>> then 1.07. Thanks Chris!
>>
>> 73 Jeff kb2m
>>
>> -----Original Message-----
>> From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Kevin via
>> AMSAT-BB
>> Sent: Wednesday, October 30, 2019 12:54 PM
>> To: amsat-bb at amsat.org
>> Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
>>
>> Hi Alan and everyone else that replied,
>>
>>     Windows Sinc also has zero decodes, tried all decoder modes.
>>
>> for now 1.07y  FTW
>>
>> Thanks
>> Kevin
>>
>>
>> On 10/29/2019 23:20, Alan wrote:
>>> I you are using the Raised Cosine decoder, try the Windows Sinc instead.
>>>
>>> 73,
>>>
>>> Alan
>>>
>>> WA4SCA
>>>
>>> *From: *Kevin via AMSAT-BB <mailto:amsat-bb at amsat.org>
>>> *Sent: *Wednesday, October 30, 2019 12:21 AM
>>> *To: *amsat-bb at amsat.org <mailto:amsat-bb at amsat.org>
>>> *Subject: *[amsat-bb] IC-9700 & foxtelem 1.08p
>>>
>>> Hi All,
>>>
>>>    Any IC-9700 users out there that have switched to foxtelem 1.08p
>>>
>>> using USB and IQ mode? I see a good eye but get zero decodes, dropping
>>>
>>> back to 1.07y and it all starts working again.
>>>
>>> 73
>>>
>>> Kevin WA7FWF
>>>
>>> _______________________________________________
>>>
>>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>>>
>>> to all interested persons worldwide without requiring membership.
>>> Opinions expressed
>>>
>>> are solely those of the author, and do not reflect the official views
>>> of AMSAT-NA.
>>>
>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>