[amsat-bb] po-101 sub tone

[Erich Eichmann]

Hi,
as far as I see the code for the FT-847 for a 141.3 sub tone is hex 08 
(p. 93 of the user manual) , for the TS-2000 it is dec. 22.
Therefore the entry in SubTone.SQF for a 141.3 sub tone for Icom radios, 
Yaesu FT-847 and Kenwood TS-2000 should be:
PO-101,141.3,$08,22

73s, Erich, DK1TB

Am 02.05.2020 um 08:41 schrieb Jerry via AMSAT-BB:
> Jack,
>
> 3F is the code for a 67Hz tone, so for 141.3 it should be different. Even without a subtone the sat can be accessed.
> Probably you are just using a 67Hz subtone because that also works.
>
> Jerry,ON4CJQ
>
> ----- Oorspronkelijk bericht -----
> Van: "amsat-bb"<amsat-bb at amsat.org>
> Aan: "amsat-bb"<amsat-bb at amsat.org>
> Verzonden: Vrijdag 1 mei 2020 21:13:02
> Onderwerp: [amsat-bb] po-101 sub tone
>
> Tom: The sub tone is as follows
>
> PO-101,141.3,$3F,1
>
> Hope that helps  73 JACK KC7MG
> _______________________________________________
> Sent viaAMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:https://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent viaAMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:https://www.amsat.org/mailman/listinfo/amsat-bb